Easy to integrate with Home Automation Systems and PC applications
CoolMaster Interface is very simple and straightforward. Implementation of software modules to   support CoolMaster is not complex at all.
 

Unified RS232 Interface
All CoolMaster products impose unified RS232 interface. It means for example that home automation application working on Mitsubishi Heavy VRF system with CoolMaster 8000MH will work exactly the same way on Daikin VRV, Sanyo VRF, Toshiba VRF and other systems with CoolMaster 1000D, 2000S, 3000T, etc'. No special interface adaptation will be required to migrate from one CoolMaster type to another
 

Full Control over Indoor Units Operation
On/Off control, Cool, Heat, Fan, Dry mode selection, Set Temperature Control, Fan Speed Control, Swing Control (for wall mounted and cassette indoor units), Filter Reset Sign, Group Operations (All On, All Off)
 

Indoor Units Monitoring
Failure Alarms, Set point temperature, Operation status (on/off) Operation mode (cool/heat/fan/dry), Fan speed (high/low), Filter sign, Swing
 

CoolMaster unit can be extended with additional Hardware & Software modules
Up to 4-GPIO, RS485, MODBUS, C-Bus(under development)
 

Field Upgradable
New Firmware can be uploaded via RS232 port. No need to open unit to change it's functionality.