Easy to integrate with Home Automation Systems and PC applications
CoolMaster Interface is very simple and straightforward. Implementation of software modules to   support CoolMaster is not complex at all.
 

Unified RS232 Interface
All CoolMaster products impose unified RS232 interface. It means for example that home automation application working on Daikin VRV system with CoolMaster 1000D will work exactly the same way on Sanyo VRF system with CoolMaster 2000S and no special interface adaptation will be required to migrate from one CoolMaster type to another.
 

Full Control over Indoor Units Operation
On/Off control,  Cool, Heat, Fan, Dry mode selection,  Set Temperature Control,  Fan Speed Control,  Swing Control (for wall mounted and cassette indoor units),  Filter Reset Sign,  Group Operations (All On, All Off)
 

Outdoor and Indoor Units Monitoring
Failure Alarms, Set point temperature, Operation status (on/off) Operation mode (cool/heat/fan/dry), Fan speed (high/low), Filter sign, Swing
 

System Diagnostics (An option for advanced users)
Outdoor Units internal parameters: Condensing, Evaporation, Ambient Temperatures, EV Opening, System Power Consumption (current), Inverter Revolutions and others
Indoor Units internal parameters: Return air, Gas and Liquid Temperatures, EV Opening
 

CoolMaster unit can be extended with additional Hardware modules
Up to 5-GPIO, RTC-Real Time Controller, Electronic Thermometer, Buzzer.
 

Field Upgradable
New Firmware can be uploaded via RS232 port. No need to open unit to change it's functionality.